Control and protection in arduous corrosive environments

  • 240V or 110V
  • Probe length 0.5m to 5m
  • Probes connected with secure plug to IP66
  • Clear displays
  • Simple to install
  • Moisture proof box sealed to IP65
  • Easy connections
  • Non-corrodable, deposit resistant and virtually unbreakable probes
  • 2 & 3 wire relay output
Temperature and Level Controller
Controller Probes Specification


Probes: 0.5m (standard) up to 12m to order
Leads: 2m (standard) up to 16m to order

Sensors: PTFE/Teflon at liquid interface
Guide tubes and frames: PP as standard PVC or PVDF available on request (eg for Hard Chrome plating). Specify at the time of order

Straight or right angle, specify at order

Temperature and Level Controllers

Temperature and Level Controllers Brochure
download datasheet

Thermaster, Levelmaster and Tankmaster

Will not corrode

The Braude temperature and level controller range is designed for control of industrial solutions and protection of equipment in corrosive environments such as those found in chemical processing, metal finishing, steel industries and marine environments.

  • Thermaster

    is a fully automatic temperature controller with a PRTD sensor and no moving parts. The Thermaster has a permanent clear display of solution temperature, simple set point adjustment with easy calibration, and a range of -10°C to +110°C.
  • Levelmaster

    is a liquid level controller, to provide dual high or low level switching, suitable for most aqueous or conductive solutions. It can be used in any vessel - steel, polymer or fibreglass. The probe has no moving parts and control height is easy to set. For deionised water, a high sensitivity version is available.
  • Tankmaster MP

    The latest version of this popular controller combines the features of the temperature and level controllers, with additional outputs available for control of heaters, coolers, pumps and alarms.
    The controller has recently been upgraded to include the use of microprocessor control which allows additional alarm functions such as high or low temperature or high high and low low level functions.
Tankmaster MP Brochure
download datasheet

All equipment is supplied with clear installation instructions, and Braude technical staff are always available to offer advice.

New Product from Braude!

Thermaster TS Temperature Sender

  • Non corrodable PT100 Thermaster sensor
  • IP67 Integral head with sender
  • 4-20mA output
  • Connect to PLC controller
  • Range -20 to 100°C
  • Accurate +/- 1°C
  • Enables remote monitoring and control