Braude chemical pumps are designed for pumping corrosive chemicals such as hydrochloric, hydrofluoric, nitric and sulphuric acids. The pumps are constructed from high integrity polymers which have high chemical and impact resistance.
The pumps provide operating heads up to 17m and suction lift up to 3.5m. A choice of three mechanical seals is available: Hastelloy C for general chemical service, stainless steel for less arduous applications or non-metallic seals for severe duties. Six motor sizes are available from 0.25kW to 1.5kW, all are rated to IP55.
All pumps are supplied with clear installation instructions, and Braude technical staff are always available to offer advice.
For flow rates up to 22,000 litres / hr
A choice of mechanical seals is available: Non metallic for general chemical transfer, Double water flushed for electroless nickel plating or solutions containing solids and silicon carbide seats for solutions contaiing HF. Water regulating kits can be supplied fitted to the pump. Available in six electric motor sizes from 0.37kW to 1.5kW. ( 1 /2hp to 2hp), either single or three phase. Motors are rated to IP55.
E Braude (London) Ltd
Liberta House | Sandhurst | Berkshire GU47 8JR · UK
+44 (0) 1252 876123 Fax +44 (0) 1252 875281
Everything © Braude: All rights reserved - do not use without permission. All trademarks acknowledged.
Throughout, “Braude” refers to E.Braude (London) Ltd.
Braude equipment is used worldwide in heavy industry, in
factories, laboratories, and harsh environments such as
chemical processing and marine applications.