Published date:

BRAUDE has established the Master range of controllers which have been proven over many years in the arduous applications found in the metal finishing, and processing industries. All controllers are manufactured with surface mount IP65 enclosures and non corrodible sensors with clear displays for easy reading at the point of use. All are supplied with flying leads for mains connection and output.


THERMASTER is a simple and reliable thermostatic controller supplied complete with a Teflon covered PT100 sensor in a simple rigid guide tube to provide protection in the tank.

THERMASTER TS is a simple probe and sender assembly to provide a 4-20mA output for remote reading and control. It can be used instead of the standard THERMASTER or alongside it to complement the standard operation.

LEVELMASTER is a dual level controller also supplied with a special sensor using Braude’s clever Carbosense conductors to provide a signal without suffering attack from corrosive solutions.

The HPD combines the benefits of the Levelmaster fitted integrally to a Polaris Popular or Modular heater for low level protection. Alternatively the Thermaster OTP provides single set point protection for safety to the OTF is a simple thermal fuse.

TANKMASTER combines the benefits of both controllers with many additional features to provide high and low level alarms for both temperature and level.

The MASTER sensors are available as standard in 0.5m lengths with 2m leads with extended versions up to 12m long with additional lead lengths to suit your particular installation.

If you need something with more features the Braude specialists will design a control panel incorporating any of the above controllers to your specific requirements. Just contact our sales office and let us know what you need.