Tankmaster Combined Temperature and Level Controller
Control for heaters, coolers and pumps in tanks and systems containing corrosive liquids
Engineered for surface mounting close to the process tank and provided with flying leads for easy electrical connection. Full fitting and operating instructions are supplied with the unit.
Supplied complete with Thermaster PT100 and Levelmaster Probes and can also be used with HPD Probes fitted to Polaris Heaters. The standard controller is configured for single temperature set pointmand high/low liquid level control.
Tankmaster MP can be used on a wide variety of processes and applications. The microprocessor setup allows the selection of a number of additional functions including high temperature alarm and go/no go temperature band..
Example of Applications
- Steel strip Wire & Tube pickling
- Metal Finishers
- Glass Producers
- Chemical Millers
- Aerospace Industry
- Chemical Plants
- Dual temperature and level control
- Fully non-corrodable sensors
- Moisture proof box sealed to IP65
- Clear temperature & set point display
- No external adjustment
- Microprocessor controlled
- Range of optional controls built in
- Range -10°c to 110°c
- Easy installation & setup
- 240V or 110V • Autosensing facility
Tankmaster Technical data
Surface mounted to IP65
Controller 175mm x 125mm x 75mm
Probe connection via Braude 2 and 3 pin plug.
Mains 240V flying lead 1m standard
Output Mains 240V flying lead 1m standard.
Volt free option available
Compatible with all Braudemaster controllers
Temperature and Level Probes
Sep 25 2020
Have been specifically designed for operation with the Braudemaster range of controllersBoth probes are supplied 0.5m long with a 2m lead as standard with longer lengths available to order. The lead is fitted with a 2 or 3 pin plug to IP67 for connect to the controller. A fixing clip is supplied for tank mounting.Temperature probe.This consists of a PT100 sensor accurate to +/- 1oC, fully sealed in a Teflon sheathing by a special process. It is recommended that all probes are paired with a controller which will be calibrated prior to despatch, however, full calibration instructions are given for replacement probes.The sensor is sited in a sturdy outer tube usually in PP with other materials available for difficult liquids. This tube ensures a secure mounting within a process tank avoiding any danger of probes getting tangled with workload.Level probe.The level probe consists of 3 filament sensors, one common. One high and one low level. These are simply cut and trimmed to length on site to give control points at the desired heights.The sensors are mounted to the outside of a central rod to prevent stray current tracking and solid build up.